Walnut Table

Project Description

This solid walnut table was designed for this small but elegant dining room. It will be complemented by a set of mid-century-modern chairs. With the table are two individual benches that will sit out of the way under the table. The joinery is 100% mortice and tenon. The only metal fasteners are a few screws holding the table top to the base. The form of the legs are a ‘modern’ take on the Mid-Century Modern table. The shape of the table legs are matched in the smaller versions of the benches.

Dimensions: 42” x 60”

Bathroom Vanity

Specifications

Wood Type: Poplar
Measurements: 48″w x 32″h x 22″d
Made In: Ottawa, Ontario
Status: Sold

Project Description

This vanity was custom made to fit the sink and counter provided by the client. The open lower portion is completed with wood slats. The cabinet includes two drawers, one on each side of the sink. The soft-close drawers include a push-to-open feature keeping a clean look with no drawer pulls. The mirror frame was made to complement the vanity, and we added the barn-board walls to complete the modern meets country look.

Walnut Bedroom Set

Project Description

This bedroom set was made in four pieces based on an inspiration from the client, and is the result of collaboration between the furniture maker and the interior designer.

We made two wide nightstands, a highboy dresser and a TV console. The pieces have solid walnut drawer fronts and doors, solid maple dovetailed drawers with soft-close under-mount slides.

Interior design by Personally Yours Interiors.

Shoe Cabinet

Specifications

Wood Type:

Maple

Measurements:

50″h x 30″d x 15″ w

Description

This chest is cleverly designed to hide the clients selection of shoes at the front door.  Designed in maple, stained to match and complement the rest of the wood work in the foyer, this cabinet makes easy access to your shoes without looking like a shoe cabinet.  The dimensions  were specified by the client to fit the space, and allow for the mirror above.  

Davidson Vanity

Specifications

Wood Type: Pine
Measurements: 22”w x 29”h x 18”d
Made In: Ottawa, Ontario
Status: Sold

Project Description

This vanity cabinet was made to fit the sink that the client had reclaimed from an older house. The vanity had to fit into the under-side of the sink. The bathroom is trimmed in pine with a variety of pine details. The answer was to keep the cabinet simple, but complement the detail of the simple angled bevel on the baseboards, so this detail was used in the raised panels of the cabinet. The door of the cabinet is actually on the side, at the client’s request, and has a push to release latch so no visible hardware was used. However, on the front of the cabinet I used a knot to look like a door pull. The cabinet features close attention to detail on selection of wood grains and details to make all parts. The joinery is all mortice and tenon on all parts.

Solid Maple Corner Cabinet

Specifications

Wood Type: Solid Maple Corner Cabinet
Measurements: 16″ wide x 16″ deep x 28″ high
Made In: Ottawa, Ontario
Status: Sold

Project Description

This small corner cabinet design was sent by the client with specific measurements for a corner of the room.  The cabinet is made entirely of solid maple, requiring some creative construction to allow for the wood movement as the seasons change.

A cute cabinet that can be done in almost any dimension, or number of shelves, and of course, any type of wood.

LP Cabinet

lp cabinet 1

Specifications

Wood Type: Solid Maple and Maple Veneer, Stained with Semi-Gloss Lacquer
Measurements: 41″ wide x 29″ deep x 38″ high
Made In: Ottawa, Ontario
Status: Sold

Project Description

This cabinet was designed to hold the client’s LP collection similar to an old record store.  It allows him to show off his collection, while storing close to 600 LP’s.  If you still have a little digital, there is room to store many CD’s under the top shelf.

There can be room for more LP’s, but this client wanted to add wine storage on the side, so there is room for 16 bottles on each side.

Cedar Blanket Chest thumbnail

Cedar Blanket Chest

Cedar Blanket Chest 545px

Specifications

Wood Type:

Cedar

Measurements:

24″h x 20″d x 36″ w

Description

This blanket box is made entirely of cedar.  The box is joined with hand-cut dovetails on all corners, including the base.  It can be made in any type of wood.  I’ve done versions of it in pine, ash and butternut and the dimensions can be made to suit your needs.

Blanket Box

Specifications

Wood Type:

Butternut

Measurements:

24″h x 20″d x 36″ wide

Description

This blanket box is made entirely of butternut.  The box is joined with hand-cut dovetails on all corners, including the base.  It can be made in any type of wood.  I’ve done versions of it in pine, ash and cedar and the dimensions can be made to suit your needs.

Pine Entertainment Unit

Specifications

Wood Type:

Solid Pine

Measurements:

H 72″ X W 48″ X L 24″

Description

Furniture designed to hold entertainment equipment can take many sizes and shapes. I can design and build them to suit specific interior requirements and the size and shape of the space where it will sit. This unit is made of soid pine with sturdy mortice and tenon joinery. Drawers are of stable quarter-sawn oak and as always features hand-cut dovetails on all four corners.