Davidson Vanity

Wood Type: Pine
Measurements: 22”w x 29”h x 18”d
Made In: Ottawa, Ontario
Status: Sold

This vanity cabinet was made to fit the sink that the client had reclaimed from an older house. The vanity had to fit into the under-side of the sink. The bathroom is trimmed in pine with a variety of pine details. The answer was to keep the cabinet simple, but complement the detail of the simple angled bevel on the baseboards, so this detail was used in the raised panels of the cabinet. The door of the cabinet is actually on the side, at the client’s request, and has a push to release latch so no visible hardware was used. However, on the front of the cabinet I used a knot to look like a door pull. The cabinet features close attention to detail on selection of wood grains and details to make all parts. The joinery is all mortice and tenon on all parts.